Exit Cap Rate Sensitivity: The 7.00% Refinance Crossover

Rate snapshot

Fed funds target3.75% to 4.00%Raised 25 bps on Sept 17, 2026; FOMC meets Oct 27 and 28
5-year Treasury4.94%Oct 20, 2026 close, unchanged from Oct 19
10-year Treasury5.12%Oct 20, 2026 close, down 3 bps from Oct 19 and up 3 bps from Oct 16
Industrial asking rent growth4.0% YOYQ3 2026 preliminary, third straight quarter of acceleration

The 10-year Treasury closed Tuesday at 5.12%, three basis points below Monday and three above where it closed Friday. The five-year, which is what prices most of the permanent debt in our range, held at 4.94% for a second session. The FOMC meets in six days, on October 27 and 28, having raised the target range 25 basis points to 3.75% to 4.00% in September.

Every refinance model sitting on a sponsor’s desk right now has an exit cap rate in it, and most of them carry a sensitivity table showing what happens to proceeds if that number is wrong. Those tables are usually wrong themselves, and not by a little.

On the deal below, $3,283,635 of appraised value separates a 6.00% exit cap from a 7.00% exit cap. The refinance proceeds are identical at both. Not similar: identical, to the dollar. The reason is a single line in the term sheet that most sponsors read past, and once you know how to use it you can calculate the exact cap rate at which your exit assumption starts to matter, before you know what your NOI will be.

Where the exit cap rate actually enters your loan

A permanent lender sizes your loan as the lowest of three tests. The first is loan-to-value, which runs off an appraised value. The second is debt yield, which is NOI divided by loan amount against a floor. The third is debt service coverage, which is NOI divided by annual debt service against a minimum.

Only the first of those three looks at value. Debt yield and DSCR are computed from NOI and the loan terms, and they do not care what an appraiser concluded. So the exit cap rate, which is nothing more than the appraiser’s capitalization assumption, feeds exactly one of the three tests.

If one of the other two tests is the binding constraint, the exit cap rate has no effect on your proceeds at all. It affects your equity value on a sale, and it affects your reported LTV, but it does not move the loan. Sponsors model it as though it always moves the loan.

The deal

A 142,000 square foot small-bay multi-tenant industrial property, acquired today with bridge debt, renovated and re-leased over 36 months, then refinanced into fixed-rate permanent debt. Small-bay is a reasonable place to run this exercise: Cushman and Wakefield put national industrial vacancy at 6.8% in the third quarter, with 76.6 million square feet of net absorption and asking rent growth of 4.0% year over year, so a mark-to-market business plan is defensible right now.

Sources and uses at acquisition

UsesAmountPer sf
Purchase price$15,620,000$110.00
Renovation hard cost$1,846,000$13.00
Leasing costs (TI and LC)$525,000$3.70
Closing and financing costs$318,000$2.24
Interest reserve$742,000$5.23
Total uses$19,051,000$134.16
SourcesAmountShare
Bridge loan, initial funding$11,300,00059.3%
Bridge loan, future funding$1,700,0008.9%
Sponsor equity$6,051,00031.8%
Total sources$19,051,000100.0%

The stabilized NOI

In-place rent averages $9.10 per square foot NNN across 84% occupancy. The plan takes the property to $11.20 per square foot at 94% economic occupancy by month 36. For reference, the national all-classes average asking rent was $10.40 per square foot NNN in the third quarter, and small-bay typically carries a premium to that.

NOI buildIn placeStabilized
Gross potential rent$1,292,200$1,590,400
Economic occupancy84%94%
Effective rental revenue$1,085,448$1,494,976
Management (3% of revenue)($32,563)($44,849)
Reserves ($0.15/sf)($21,300)($21,300)
Non-recoverable opex ($0.35/sf)($49,700)($49,700)
Net operating income$981,885$1,379,127

That is 40.5% NOI growth over the hold, and a 7.24% yield on total cost. It is an aggressive plan. Hold that thought, because it matters later.

The three constraints, priced off Tuesday’s curve

Permanent quote: the five-year Treasury at 4.94% plus 225 basis points, so a 7.19% coupon on a 30-year amortization schedule. That produces an annual loan constant of 8.137%. Lender tests are 70% maximum LTV, a 10.0% minimum debt yield, and a 1.20x minimum DSCR.

The useful move is to convert each test into a multiple of NOI. Debt yield gives a loan of NOI divided by 10.0%, which is 10.00 times NOI. DSCR gives NOI divided by 1.20, divided again by the 8.137% constant, which is 10.24 times NOI. LTV gives 70% of NOI divided by the cap rate, so it is the only one of the three whose multiple changes with the cap rate.

TestLoan as multiple of NOIDepends on cap rate?
Debt yield, 10.0% floor10.00xNo
DSCR, 1.20x at a 8.137% constant10.24xNo
LTV, 70% maximum0.70 divided by cap rateYes

Debt yield is the tighter of the two value-independent tests at 10.00 times NOI, so it sets the floor. That single number is what makes the rest of this calculable.

The crossover cap rate

LTV becomes the binding test only when 0.70 divided by the cap rate falls below 10.00. Solve it and the cap rate where the two tests cross is 0.70 times 10.0%, which is 7.00%.

The formula is worth committing to memory, because it is the whole point of this post. Your crossover cap rate equals the lender’s maximum LTV multiplied by the lender’s debt yield floor. At 70% and 10.0%, that is 7.00%. Below 7.00%, the debt yield floor binds and your exit cap rate does nothing to your proceeds. Above 7.00%, LTV binds and every basis point costs you.

What the sensitivity table should look like

Bridge payoff at refinance is the full $13,000,000 commitment, plus a 0.5% exit fee of $65,000, with permanent loan costs of 1.25% of the new loan.

Exit capAppraised valueLTV testDebt yield testDSCR testBindingLoanNet cash to sponsor
6.00%$22,985,445$16,089,812$13,791,267$14,123,445Debt yield$13,791,267$553,876
6.25%$22,066,028$15,446,219$13,791,267$14,123,445Debt yield$13,791,267$553,876
6.50%$21,217,334$14,852,134$13,791,267$14,123,445Debt yield$13,791,267$553,876
6.75%$20,431,507$14,302,055$13,791,267$14,123,445Debt yield$13,791,267$553,876
7.00%$19,701,810$13,791,267$13,791,267$14,123,445Crossover$13,791,267$553,876
7.25%$19,022,438$13,315,706$13,791,267$14,123,445LTV$13,315,706$84,260
7.50%$18,388,356$12,871,849$13,791,267$14,123,445LTV$12,871,849($354,049)
7.75%$17,795,183$12,456,628$13,791,267$14,123,445LTV$12,456,628($764,079)
8.00%$17,239,084$12,067,359$13,791,267$14,123,445LTV$12,067,359($1,148,483)

Read the top five rows. A full 100 basis points of exit cap assumption, 6.00% through 7.00%, produces the same $13,791,267 loan and the same $553,876 of net cash. The appraised value across that range moves by $3,283,635, or 16.7%, and none of it reaches the sponsor.

Then read the bottom four. Above the crossover, each 25 basis points costs between $389,270 and $475,561 of proceeds, averaging $430,977. The deal flips from cash-out to cash-in between a 7.25% and a 7.50% exit, which is to say 50 basis points past the crossover the sponsor is writing a check instead of taking a distribution.

Simplifications: stabilized NOI is held constant across the cap rate rows to isolate the cap rate effect, where in practice a softer exit cap and softer NOI usually arrive together. The bridge is assumed fully drawn with the interest reserve exhausted and no accrued default interest. Net cash is before transfer taxes, legal fees, and any reserves the new lender escrows at closing. The permanent quote is a 7.19% coupon held constant across all rows, though a lender facing a weaker appraisal would often widen the spread as well, which makes the right-hand rows worse than shown.

The error this creates in practice

Take the sponsor’s base case of a 6.75% exit. Value is $20,431,507, and 70% of that is $14,302,055. That is the number most models carry forward as refinance proceeds. The lender will fund $13,791,267, because the debt yield floor binds first.

The overstatement is $510,788. The loan that actually funds carries a 67.50% LTV, a 1.229x DSCR and a 10.00% debt yield, so two of the three tests have room and the third has none. To actually reach a 70% LTV loan at that value, the debt yield floor would have to be 9.64%, which is 36 basis points below where it sits, or stabilized NOI would have to come in 3.70% higher at $1,430,205.

This is why a sponsor can run a careful downside case, see proceeds hold up at a 6.50% exit, and still arrive at closing short. The model was never sensitive to the thing it was testing.

The crossover does not move with NOI

This is the part that makes the formula usable at term sheet stage. Because NOI appears in both the LTV test and the debt yield test, it cancels when you solve for the crossing point. The crossover cap rate is a property of the loan terms, not of the property.

Stabilized NOI6.00% exit6.50% exit7.00% exit7.50% exit8.00% exit
90% of plan ($1,241,214)$12,412,140$12,412,140$12,412,140$11,584,664$10,860,623
95% of plan ($1,310,170)$13,101,704$13,101,704$13,101,704$12,228,257$11,463,991
100% of plan ($1,379,127)$13,791,267$13,791,267$13,791,267$12,871,849$12,067,359
105% of plan ($1,448,083)$14,480,831$14,480,831$14,480,831$13,515,442$12,670,727

In every row the first three columns are flat and the break occurs at the same place. The dollars change with NOI, the location of the kink does not. You can therefore calculate the crossover from a term sheet months before the appraisal is ordered.

The table also shows where the real risk lives on this deal. Below the crossover, proceeds are 10.00 times NOI and nothing else, so a 10% NOI miss is a 10% proceeds miss. Running it against the $13,065,000 payoff and fees, stabilized NOI can come in 4.07% light before the refinance stops covering the bridge. Against a plan calling for 40.5% NOI growth, 4.07% of tolerance is the number worth losing sleep over, not the cap rate.

Finding your own crossover

Multiply the maximum LTV by the debt yield floor. The grid below covers the range we see on middle-market quotes.

Maximum LTV9.0% floor9.5% floor10.0% floor10.5% floor11.0% floor
60%5.40%5.70%6.00%6.30%6.60%
65%5.85%6.18%6.50%6.83%7.15%
70%6.30%6.65%7.00%7.35%7.70%
75%6.75%7.13%7.50%7.88%8.25%

Two readings matter. At 70% LTV, every 50 basis point rise in the debt yield floor pushes the crossover up by 35 basis points, which widens the band where your cap rate is irrelevant. And cutting maximum LTV from 70% to 65% at a 10.0% floor drops the crossover from 7.00% to 6.50%, which narrows it.

That first reading is counterintuitive and worth sitting with. A tighter debt yield floor gives you a smaller loan, but it also makes your proceeds less sensitive to the appraisal. A looser floor gives you more money and more appraisal risk. With the Fed having tightened in September and the five-year at 4.94%, floors have been drifting up, not down.

What to do with this before your next refinance

  1. Pull the maximum LTV and the debt yield floor off every term sheet you hold and multiply them. That product is your crossover cap rate.
  2. Compare it to the exit cap rate in your model. If your assumption is below the crossover, your proceeds are set by NOI, and your cap rate sensitivity table is decoration.
  3. Convert the DSCR test into an NOI multiple as well: divide one by the minimum DSCR, then divide by the annual loan constant. If that multiple is lower than one divided by the debt yield floor, DSCR is your real floor and you should use it in the crossover formula instead.
  4. Re-run your downside case on NOI rather than on the cap rate when you sit below the crossover. Find the NOI at which proceeds stop covering your payoff and closing costs, and state it as a percentage of plan.
  5. Check the implied LTV of the loan the floor actually produces. On this deal it was 67.50% against a 70% cap, and that 2.5 points of unused LTV is the clearest tell that value is not your constraint.
  6. Ask the lender whether the debt yield floor moves with the appraisal. Usually it does not, which is exactly why it dominates. If it does move, the crossover is not stable and the analysis has to be redone.

Red flags in an exit cap assumption

  1. A sensitivity table where proceeds change at every cap rate increment. Unless LTV binds across the entire range, at least some of those rows should be flat, and if none are, the model is not applying the lender’s floors.
  2. An exit cap below the going-in cap with no stated reason. Cap rate compression is a forecast, not an underwriting input, and with the 10-year at 5.12% it is a hard one to defend.
  3. An exit cap set equal to the going-in cap on a property whose business plan changes its tenancy profile. Re-leasing small bays to a different credit mix changes the buyer pool and the cap rate with it.
  4. A yield on cost that sits within 25 basis points of the exit cap. On this deal it is 7.24% against a 6.75% exit, a 49 basis point spread, and anything thinner means the renovation is not earning its risk.
  5. No distinction between the appraiser’s capitalization rate and the sponsor’s exit cap. They are different numbers produced by different parties for different purposes, and only the appraiser’s feeds the LTV test.
  6. A refinance dated to the month the bridge matures. If NOI needs to hold for a quarter to clear the debt yield floor, the loan has to be sized off trailing numbers that exist by then.

How QuadBlock can help

We lend from $250,000 to $30,000,000 on bridge, transitional, and permanent financing across multifamily, industrial, retail, self-storage, specialty, and ground-up residential, in every state except Oregon and Nevada. On a transitional industrial deal like the one above, the useful conversation happens before the bridge closes, when the takeout constraints can still shape how the business plan and the interest reserve are sized. Send the deal through quadblockcapital.com and we will run the crossover on your actual term sheet.

This article is for general educational purposes and is not tax, legal, or investment advice. The worked example uses hypothetical inputs and is not a quote, a commitment, or an indication of terms. Loan sizing tests, spreads, and underwriting standards vary by lender, asset, market, and sponsor, and the figures shown here will not match any specific transaction. Treasury yields, the federal funds target range, and market data are as of the dates stated and change continuously. Consult your own tax, legal, and financial advisors before acting on any financing or investment decision.

Sources

  1. Board of Governors of the Federal Reserve System, Open Market Operations (federal funds target range history)
  2. Board of Governors of the Federal Reserve System, FOMC Meeting Calendars
  3. U.S. Department of the Treasury, Daily Treasury Par Yield Curve Rates, October 2026
  4. Cushman & Wakefield, U.S. Industrial MarketBeat, Q3 2026
Scroll to Top